AC Power Low Voltage Surge Protection Device XZ1-SPD80100

As a professional high quality AC Power Low Voltage Surge Protection Device XZ1-SPD80100 manufacturer, you can rest assured to buy AC Power Low Voltage Surge Protection Device XZ1-SPD80100 from our factory. And we will offer you the best after-sale service and timely delivery.XZ1-SPD80, 100 series surge protector is suitable for low-voltage AC power distribution 50/60Hz, 230/400V and below IT, TT, TN-C, TN-S, TN-C-S and other power supply systems can be connected in parallel on the power line for equal potential when lightning strikes.

Send Inquiry

Product Description

Wenzhou Changjiu Technology Co., Ltd. is a professional China AC Power Low Voltage Surge Protection Device XZ1-SPD80100 manufacturer and supplier, known for its quality service. Adhering to the pursuit of perfect quality of products, so that our AC Power Low Voltage Surge Protection Device XZ1-SPD80100 have been satisfied by many customers. In order to ensure the quality and customer needs, we have cooperated with domestic power groups with strong production strength. We will strictly screen each supplier and send videos to customers to watch.

XZ1-SPD80, 100 series surge protector is suitable for low-voltage AC power distribution 50/60Hz, 230/400V and below IT, TT, TN-C, TN-S, TN-C-S and other power supply systems can be connected in parallel on the power line for equal potential when lightning strikes. Mainly used to protect low-voltage customer electrical installations from surges caused by atmospheric discharge (e.g. to indirect lightning) or other operating instantaneous overvoltages. As a single voltage limiting device. Products comply with GB18802.1,GB50057 and lEC61643-1 standards.

The SPD has a built-in disconnector. When the SPD fails due to overheating or breakdown, the disconnector can automatically disconnect it from the power grid and give an indication signal. The visual window displays green when SPD is working normally, and red when it disengages.

The protection device shall be installed at the end of the upline (immediately connected to the downline of the pull-in wire) required to protect thecustomer's equipment, connecting the outer lead(L) or neutral lead (N) to the grounding device of the customer's equipment. It is installed at the junction of LPZOA zone and LPZ1 zone, with 35mm standard guide rail and 16-35mm2 copper multi-wire connection.

Each front pole of SPD surge protector must be connected in series with XZSCB series surge backup protector or fuse.

Usually installed in the line of low voltage main distribution cabinet, used for primary power equipment protection, often used in vulnerable to lightning outdoor power distribution cabinets,power distribution cabinets and indoor irfpa have to qualify the roof of the power distribution equipment, suitable forcivil construction, electrical, communications, road traffic, such as the petrochemical industry of power equipment protection.

AC Power Low Voltage Surge Protection Device Main technical parameters

Specifications	XZ1-SPD80			XZ1-SPD100
The number of	1P、1P+N、2P、3P、3P+N、4P
In(8/20 μs) Nominal discharge current	40kA			60kA
1peak(10/350 μs) The peak current	80kA			100kA
Uc(VAC) Maximum Continuous Operating Voltage	275	385	420	275	385	420
Uc(kV) Voltage protection level	1.8	2.2	2.5	2.0	2.5	2.8
(ns)Response time	<25
Protection grade	IP20
The failure indicator	Green is nomal, red is ineffective
Test classification	Class II
Ambient limit femperature TU	-40℃~80℃
Front over current protection device	XZSCB-80			XZSCB-100
Type of installation	35mm standard guide rail is used for installation
(mm2) lnduced power line cross-sectional area	16-35mm2/ Multicore flexible cable
Note	Remote signal function can be added, other maximum continuous working voltage uC can be customized